Difference between revisions of "Main Page"
From Lofaro Lab Wiki
(→Projects) |
(→Tutorials) |
||
Line 21: | Line 21: | ||
* [[Python-OpenCV Tutorials]] | * [[Python-OpenCV Tutorials]] | ||
* [[OpenCM 9.04]] | * [[OpenCM 9.04]] | ||
+ | * [[Adding Gazebo model with SLAM capabilities]] | ||
+ | * [[Setting up RGBDSLAM with ROS in Gazebo]] | ||
+ | * [[Setting up RGBDSLAM with ROS in the real world]] | ||
== Models == | == Models == | ||
* [[3D model of Lofaro Labs in ~.STL format]] | * [[3D model of Lofaro Labs in ~.STL format]] |
Revision as of 11:14, 28 October 2014
Contents
Robots
Projects
- Baxter Peg-In-Hole
- Oculus Virtual Reality Telepresence System
- Hubo DRC Peg-In-Hole & Valve Turn
- SLAM using Mapping and Wifi Signal Strength
Tutorials
- Streaming webcams to Oculus Rift with openCV
- Configuring Baxter robot
- Setting up Oculus rift servo controller dependencies
- Installing openrave, openhubo, hubo-ach and performing peg-in-hole
- Raspberry_Pi_and_Arducopter_connections_through_ROS
- Ros_on_Raspberry_pi
- ROS Tutorials
- ROS Operations and Basic Concepts
- Python-OpenCV Tutorials
- OpenCM 9.04
- Adding Gazebo model with SLAM capabilities
- Setting up RGBDSLAM with ROS in Gazebo
- Setting up RGBDSLAM with ROS in the real world