Serial Communication Protocol

From Lofaro Lab Wiki
Revision as of 14:59, 27 April 2015 by Rtindel2 (Talk | contribs)

Jump to: navigation, search

Metadata Format:

User(Robot) sends message: “MD #B #F”

MILES responds by sending contents of metadata file corresponding to building and floor specified line by line.

Ends the send with <END>


Ex:

Robot:

MD 37 4

MILES:

x: 1||y: 10||Location: Lofaro Labs||Description: The laboratory of Dr. Lofaro that his senior design students and other robotics students use.||

x: 10||y: 1||Location: Elevator||Description: The center 4th floor elevator.||

x: 15||y: 15||Location: Room 4402||Description: This is Professor Someones Room.|| <END>


Map

User(Robot) sends message “MAP #B #F”

MILES responds by sending map corresponding to the building and floor specified.


Ex:

Robot: MAP 37 4


MILES: Sends 2D map .pgm file line by line


Location Once:

User(Robot) sends message “LONCE”

MILES responds by sending the current location calculated by our Localization algorithm


Ex:

Robot: LONCE

MILES: X: %f||Y: %f||z:%d||O:%f


HINT: O stands for Orientation

Location Auto:

User(Robot) sends message “LAUTO”

MILES responds by sending the current location calculated by our localization algorithm and continues to send at 5 Hz.

User(Robot) can send message “LSTOP” to stop MILES from sending messages

--Brandhaw (talk) 17:43, 22 April 2015 (EDT)