Difference between revisions of "Minibot Controller/XL-320"
From Lofaro Lab Wiki
Line 32: | Line 32: | ||
'''Forearm''' | '''Forearm''' | ||
− | *Before connecting next part, Connect wire to the servo. Then connect Forearm. | + | *'''Before connecting next part, Connect wire to the servo'''. Then connect Forearm (Part1). |
[[File:Minibot_Controller_(3).png]] | [[File:Minibot_Controller_(3).png]] | ||
[[File:Minibot_Controller_(4).png]] | [[File:Minibot_Controller_(4).png]] | ||
Line 40: | Line 40: | ||
[[File:Minibot_Controller_(6).png]] | [[File:Minibot_Controller_(6).png]] | ||
− | *Connect Elbow part, similar as you put the upper hand, put 4 rivets on side with wheel, and 1 on the other side. | + | *Connect Elbow part (Part2), similar as you put the upper hand, put 4 rivets on side with wheel, and 1 on the other side. |
[[File:Minibot_Controller_(7).png]] | [[File:Minibot_Controller_(7).png]] | ||
Revision as of 12:55, 17 April 2015
This is the instruction of building the controller for Minibot.
Notes :
- The zero positions will be placed as same as how Minibot is assembled
- - Instruction of Minibot indicates to place zero positions to be at top.
- There are only one arm in the instruction.
- Face the servo as shown in image for one arm.
- Another arm will be mirrored to the instruction.
- 2-step rivets are used for all instruction except indicated section.
3D printing :
- STL files are uploaded here.
- You might need to convert STL files to 3D printable file.
The claw
- For movable part of the hand, one of the side of servo will not have wheel; Connect Servo with the hand by putting rivet in the middle hole only.
- On the other side of the servo, For upper hand, put rivets on outer holes.
Forearm
- Before connecting next part, Connect wire to the servo. Then connect Forearm (Part1).
- As Previous part, connect wire before putting forearm.
- Connect Elbow part (Part2), similar as you put the upper hand, put 4 rivets on side with wheel, and 1 on the other side.