Difference between revisions of "CRITR/Generation 2/Arm Controller"
From Lofaro Lab Wiki
m (Echung8 moved page CRITR/Prototype 2/Arm Controller to CRITR/Generation 2/Arm Controller) |
|||
| Line 3: | Line 3: | ||
* Zero position of potentiometer will be placed identical to Robot. | * Zero position of potentiometer will be placed identical to Robot. | ||
* Assembling instruction of the controller is same as prototype 1 | * Assembling instruction of the controller is same as prototype 1 | ||
| + | |||
| + | 3D printing : | ||
| + | *STL files are uploaded [http://www.thingiverse.com/thing:1184765 here]. | ||
| + | *You might need to convert STL files to 3D printable file. | ||
* [[CRITR/Prototype 1/Arm and Arm controller]] | * [[CRITR/Prototype 1/Arm and Arm controller]] | ||
Revision as of 18:28, 8 December 2015
Notes:
- Second generation of Arm controller uses potentiometer.
- Zero position of potentiometer will be placed identical to Robot.
- Assembling instruction of the controller is same as prototype 1
3D printing :
- STL files are uploaded here.
- You might need to convert STL files to 3D printable file.
