Difference between revisions of "CRITR/Generation 1/Arm and Arm controller"
From Lofaro Lab Wiki
Line 20: | Line 20: | ||
[[File:p1_(4).PNG]] | [[File:p1_(4).PNG]] | ||
− | |||
− | |||
[[File:p1_(3).PNG]] | [[File:p1_(3).PNG]] |
Revision as of 14:08, 6 December 2015
Notes:
- The zero positions of servo’s will be place at top.
- There are only one arm in the instruction.
- Face the servo as shown in image for one arm.
- Another arm will be mirrored to the instruction.
- 2-step rivets are used for all instruction.
- To construct, follow the pictures below in order.
3D printing :
- STL files are uploaded here.
- You might need to convert STL files to 3D printable file.
The picture shown on right is flipped view of picture on left.