Difference between revisions of "CRITR/Generation 1/Arm and Arm controller"
From Lofaro Lab Wiki
Line 3: | Line 3: | ||
The zero positions of servo’s will be place at top. | The zero positions of servo’s will be place at top. | ||
− | + | * There are only one arm in the instruction. | |
− | + | * Face the servo as shown in image for one arm. | |
− | + | * Another arm will be mirrored to the instruction. | |
− | + | * 2-step rivets are used for all instruction. | |
− | + | * To construct, follow the pictures below in order. | |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
3D printing : | 3D printing : | ||
− | + | * STL files are uploaded here. | |
− | + | * You might need to convert STL files to 3D printable file. | |
− | + | ||
− | + | ||
Revision as of 02:01, 7 November 2015
Notes:
The zero positions of servo’s will be place at top.
- There are only one arm in the instruction.
- Face the servo as shown in image for one arm.
- Another arm will be mirrored to the instruction.
- 2-step rivets are used for all instruction.
- To construct, follow the pictures below in order.
3D printing :
- STL files are uploaded here.
- You might need to convert STL files to 3D printable file.
The picture shown on right is flipped view of picture on left.