Difference between revisions of "CRITR/Generation 1/Arm and Arm controller"
From Lofaro Lab Wiki
m (Echung8 moved page Critrs/prototype1 to CRITR/prototype1) |
|
(No difference)
|
Revision as of 13:17, 8 December 2015
Notes:
- The zero positions of servo’s will be place at top of the servo.
- There are only one arm in the instruction.
- Face the servo as shown in image for one arm.
- Another arm will be mirrored to the instruction.
- 2-step rivets are used for all instruction except where indicated.
- To construct, follow the pictures below in order.
3D printing :
- STL files are uploaded here.
- You might need to convert STL files to 3D printable file.