Difference between revisions of "CRITR/Generation 1/Arm and Arm controller"
From Lofaro Lab Wiki
Line 31: | Line 31: | ||
[[File:p1_(15).PNG]] | [[File:p1_(15).PNG]] | ||
− | Use 3step rivet to connect | + | Use 3step rivet to connect. |
[[File:p1_(16).PNG]] | [[File:p1_(16).PNG]] |
Revision as of 14:36, 6 December 2015
Notes:
- The zero positions of servo’s will be place at top of the servo.
- There are only one arm in the instruction.
- Face the servo as shown in image for one arm.
- Another arm will be mirrored to the instruction.
- 2-step rivets are used for all instruction except where indicated.
- To construct, follow the pictures below in order.
3D printing :
- STL files are uploaded here.
- You might need to convert STL files to 3D printable file.