Difference between revisions of "CRITR/Generation 1/Arm and Arm controller"
From Lofaro Lab Wiki
(Created page with "File:p1_(1).png File:p1_(2).png File:p1_(3).png File:p1_(4).png File:p1_(5).png File:p1_(6).png File:p1_(7).png File:p1_(8).png File:...") |
m (Echung8 moved page CRITR/Prototype 1/Arm and Arm controller to CRITR/Generation 1/Arm and Arm controller) |
||
(40 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
− | + | Notes: | |
− | + | ||
− | + | * The zero positions of servo’s will be place at top of the servo. | |
− | + | * There are only one arm in the instruction. | |
− | [ | + | * Face the servo as shown in image for one arm. |
− | [[File:p1_( | + | * Another arm will be mirrored to the instruction. |
− | [[File:p1_( | + | * 2-step rivets are used for all instruction except where indicated. |
− | [[File:p1_( | + | * To construct, follow the pictures below in order. |
− | [[File:p1_( | + | |
− | [[File:p1_( | + | 3D printing : |
− | [[File:p1_( | + | * STL files are uploaded [http://www.thingiverse.com/thing:1178334 here]. |
− | [[File:p1_( | + | * You might need to convert STL files to 3D printable file. |
− | [[File:p1_( | + | |
− | [[File:p1_( | + | |
− | [[File:p1_(15). | + | [[File:p1_(1).PNG]] |
− | [[File:p1_(16). | + | |
− | [[File:p1_(17). | + | [[File:p1_(2).PNG]] |
− | [[File:p1_(18). | + | [[File:p1_(6).PNG]] |
− | + | ||
− | [[File:p1_(20). | + | [[File:p1_(4).PNG]] |
+ | [[File:p1_(3).PNG]] | ||
+ | |||
+ | [[File:p1_(7).PNG]] | ||
+ | |||
+ | [[File:p1_(8).PNG]] | ||
+ | |||
+ | [[File:p1_(10).PNG]] | ||
+ | |||
+ | |||
+ | [[File:p1_(11).PNG]] | ||
+ | |||
+ | [[File:p1_(15).PNG]] | ||
+ | Use 3step rivet to connect. | ||
+ | |||
+ | [[File:p1_(16).PNG]] | ||
+ | |||
+ | [[File:p1_(17).PNG]] | ||
+ | |||
+ | [[File:p1_(18).PNG]] | ||
+ | |||
+ | [[File:p1_(20).PNG]] |
Latest revision as of 13:55, 8 December 2015
Notes:
- The zero positions of servo’s will be place at top of the servo.
- There are only one arm in the instruction.
- Face the servo as shown in image for one arm.
- Another arm will be mirrored to the instruction.
- 2-step rivets are used for all instruction except where indicated.
- To construct, follow the pictures below in order.
3D printing :
- STL files are uploaded here.
- You might need to convert STL files to 3D printable file.