Difference between revisions of "CRITR/Generation 1/Arm and Arm controller"
From Lofaro Lab Wiki
Line 1: | Line 1: | ||
Notes: | Notes: | ||
− | The zero positions of servo’s will be place at top. | + | |
+ | The zero positions of servo’s will be place at top. | ||
+ | |||
• There are only one arm in the instruction. | • There are only one arm in the instruction. | ||
+ | |||
• Face the servo as shown in image for one arm. | • Face the servo as shown in image for one arm. | ||
+ | |||
• Another arm will be mirrored to the instruction. | • Another arm will be mirrored to the instruction. | ||
+ | |||
• 2-step rivets are used for all instruction. | • 2-step rivets are used for all instruction. | ||
+ | |||
• To construct, follow the pictures below in order. | • To construct, follow the pictures below in order. | ||
+ | |||
3D printing : | 3D printing : | ||
+ | |||
• STL files are uploaded here. | • STL files are uploaded here. | ||
+ | |||
• You might need to convert STL files to 3D printable file. | • You might need to convert STL files to 3D printable file. | ||
Revision as of 02:00, 7 November 2015
Notes:
The zero positions of servo’s will be place at top.
• There are only one arm in the instruction.
• Face the servo as shown in image for one arm.
• Another arm will be mirrored to the instruction.
• 2-step rivets are used for all instruction.
• To construct, follow the pictures below in order.
3D printing :
• STL files are uploaded here.
• You might need to convert STL files to 3D printable file.
The picture shown on right is flipped view of picture on left.