Difference between revisions of "CRITR/Generation 1/Arm and Arm controller"
From Lofaro Lab Wiki
Line 1: | Line 1: | ||
+ | Notes: | ||
+ | The zero positions of servo’s will be place at top. | ||
+ | • There are only one arm in the instruction. | ||
+ | • Face the servo as shown in image for one arm. | ||
+ | • Another arm will be mirrored to the instruction. | ||
+ | • 2-step rivets are used for all instruction. | ||
+ | • To construct, follow the pictures below in order. | ||
+ | |||
+ | 3D printing : | ||
+ | • STL files are uploaded here. | ||
+ | • You might need to convert STL files to 3D printable file. | ||
+ | |||
+ | |||
+ | |||
[[File:p1_(1).PNG]] | [[File:p1_(1).PNG]] | ||
Line 23: | Line 37: | ||
[[File:p1_(13).PNG]] | [[File:p1_(13).PNG]] | ||
− | The picture shown on right is flipped view of picture on left | + | The picture shown on right is flipped view of picture on left. |
Revision as of 01:59, 7 November 2015
Notes: The zero positions of servo’s will be place at top. • There are only one arm in the instruction. • Face the servo as shown in image for one arm. • Another arm will be mirrored to the instruction. • 2-step rivets are used for all instruction. • To construct, follow the pictures below in order.
3D printing : • STL files are uploaded here. • You might need to convert STL files to 3D printable file.
The picture shown on right is flipped view of picture on left.