Difference between revisions of "CNC Router (Gerber)"
From Lofaro Lab Wiki
(→Procedure/Instructions) |
(→Procedure/Instructions) |
||
(6 intermediate revisions by the same user not shown) | |||
Line 6: | Line 6: | ||
= What you will learn = | = What you will learn = | ||
− | * change end mill | + | * change an end mill |
* Secure a work piece | * Secure a work piece | ||
* Set work origin | * Set work origin | ||
Line 20: | Line 20: | ||
Make a plate a wood plate of your initials: | Make a plate a wood plate of your initials: | ||
* Minimum two letters | * Minimum two letters | ||
− | * Text tool is | + | * Text tool is prohibited |
* 0.25" holes at each corner | * 0.25" holes at each corner | ||
* A unique piece of stock will be assigned to you | * A unique piece of stock will be assigned to you | ||
− | * Plate must be milled using 0. | + | * Plate must be milled using 0.25" flat end mill only |
= Procedure/Instructions = | = Procedure/Instructions = | ||
Creating a model of your name plate: | Creating a model of your name plate: | ||
− | 1. | + | 1. Measure assigned piece of stock |
− | 2. Create a sketch | + | 2. Create a 2D sketch of your name plate |
− | + | * use various shapes, lines, and curve tools to create your initials | |
− | + | * Use circles for mounting holes, use mirror tool or pattern tool to place one circle at each corner | |
− | + | * Use rectangles for back plate and raised boarder around letters | |
− | + | 3. Extrude to make a solid body | |
− | + | 4. Ask supervising staff to review model | |
+ | 5. Make needed revisions and repeat #6 | ||
Creating tool path: | Creating tool path: | ||
1. Enter the CAM work space | 1. Enter the CAM work space | ||
2. Start a new setup, edit setup and stock options | 2. Start a new setup, edit setup and stock options | ||
− | 3. Create | + | 3. Create a tool, Hint: you may use aluminum sample as starting point |
4. Use 2D and Drill operations to generate necessary tool paths | 4. Use 2D and Drill operations to generate necessary tool paths | ||
5. Simulate your tool paths | 5. Simulate your tool paths |
Latest revision as of 01:16, 28 December 2017
Contents
Overview
Learn how to use, maintain and operate CNC routers.
Prerequisites
- 3D CAD Modeling (| Fusion 360)
What you will learn
- change an end mill
- Secure a work piece
- Set work origin
- Export appropriate G code
- Drill a hole/Plunge into stock
- Clear a pocket
- Follow a contour
Estimated time required
~180 min, varies depending on prior experience using CAD/CAM
Signature Requirements
Make a plate a wood plate of your initials:
- Minimum two letters
- Text tool is prohibited
- 0.25" holes at each corner
- A unique piece of stock will be assigned to you
- Plate must be milled using 0.25" flat end mill only
Procedure/Instructions
Creating a model of your name plate:
1. Measure assigned piece of stock 2. Create a 2D sketch of your name plate * use various shapes, lines, and curve tools to create your initials * Use circles for mounting holes, use mirror tool or pattern tool to place one circle at each corner * Use rectangles for back plate and raised boarder around letters 3. Extrude to make a solid body 4. Ask supervising staff to review model 5. Make needed revisions and repeat #6
Creating tool path:
1. Enter the CAM work space 2. Start a new setup, edit setup and stock options 3. Create a tool, Hint: you may use aluminum sample as starting point 4. Use 2D and Drill operations to generate necessary tool paths 5. Simulate your tool paths 6. Ask supervising staff to review: setup, tool, paths, and simulation 7. Make needed revisions and repeat #6 8. Use appropriate post processor to generate G-code 9. Review G-code