Tutorial (Catenary)
From Lofaro Lab Wiki
Revision as of 18:56, 7 May 2016 by Sd-uav-mine-2016 (Talk | contribs)
Materials Needed
Two P3DXs Two Raspberry PI 2 Model B V1.1 Two microSD cards (both have to be same size; 32GB and 32GB) for the Raspberry Pis a 60 inch chain from HomeDepot
Setup the PI
1. flash the microSD card using the image file from this link: image link
After you download the zip file from the provided link, extract it to get the image file.
To write the image on the microSD card, we used the software Win32Disk Disk Imager, which can be downloaded from this link: Win32 Link
2.