Tutorial (Catenary)
From Lofaro Lab Wiki
Revision as of 18:54, 7 May 2016 by Sd-uav-mine-2016 (Talk | contribs)
Materials Needed
Two P3DXs Two Raspberry PI 2 Model B V1.1 Two microSD cards (both have to be same size; 32GB and 32GB) for the Raspberry Pis a 60 inch chain from HomeDepot
Setup the PI
1. flash the microSD card using the image file from this link: image link
After you download the zip file from the provided link, extract it to get the image file.
Now you also need a software to write the image on the microSD card. We used Win32Disk Disk Imager, which can be downloaded from this link: Win32 Link
2.