Robotis Dynamixel XM-430 Based Torque Reactive Joint

From Lofaro Lab Wiki
Revision as of 01:59, 22 April 2016 by Dlofaro (Talk | contribs)

Jump to: navigation, search

Overview

The robotic joint was design with a gear ratio of 2 to 1. The mount holes on the back of the base match with the mount holes on the limb attachment piece allowing for easily connecting multiple joints in series. The parts where design in Autodesk Inventor, dimensions chosen to fit precisely with the model servo, modifications where made to the 3D printed models to allow for the lack of precision in 3D printing.

Parts

Joint Base

Joint-base.png


Servo Gear

Servo-gear.png


Joint Gear

Joint-gear.png

Limb Attachment

Limb-attachment.png

Full Assembly

Full-assembly-1.png

Full-assembly-2.png

Retrieved from "http://wiki.lofarolabs.com/index.php?title=Robotis_Dynamixel_XM-430_Based_Torque_Reactive_Joint&oldid=1874"