Difference between revisions of "Read and Write NTFS on a Mac (OSX)"
From Lofaro Lab Wiki
(Created page with "=Overview= This tutorial will show you how to mount NTFS on an OSX (Mac) system in a read/write state. =Prerequisites= * Have [https://brew.sh/ Brew] installed =Install "Mo...") |
(→Install "Mounty") |
||
| Line 9: | Line 9: | ||
brew cask install mounty | brew cask install mounty | ||
| − | Other instructions can be found on the Mounty homepage [https://mounty.app/] | + | Other instructions can be found on the Mounty homepage [https://mounty.app/ https://mounty.app/] |
=Run the App= | =Run the App= | ||
Open the app from your Applications directory. When asked if you want to remount in a read/write state say "yes." | Open the app from your Applications directory. When asked if you want to remount in a read/write state say "yes." | ||
Revision as of 03:03, 6 July 2019
Overview
This tutorial will show you how to mount NTFS on an OSX (Mac) system in a read/write state.
Prerequisites
- Have Brew installed
Install "Mounty"
Run the following command in the terminal to install Mounty:
brew cask install mounty
Other instructions can be found on the Mounty homepage https://mounty.app/
Run the App
Open the app from your Applications directory. When asked if you want to remount in a read/write state say "yes."
