Difference between revisions of "Moving The P3DX In Gazebo"
From Lofaro Lab Wiki
(→Get code for moving the P3-DX) |
(→Obtaining the P3-DX model) |
||
| Line 6: | Line 6: | ||
== Obtaining the P3-DX model == | == Obtaining the P3-DX model == | ||
Git clone P3-DX model from https://github.com/SD-Robot-Vision/PioneerModel.git | Git clone P3-DX model from https://github.com/SD-Robot-Vision/PioneerModel.git | ||
| − | <nowiki>git clone https://github.com/SD-Robot-Vision/PioneerModel.git</nowiki> | + | <nowiki>$ git clone https://github.com/SD-Robot-Vision/PioneerModel.git</nowiki> |
Install the P3-DX model in your catkin_ws by following the steps in the README of the git repository. | Install the P3-DX model in your catkin_ws by following the steps in the README of the git repository. | ||
Revision as of 19:39, 31 January 2015
Prerequisites: Ubuntu, Gazebo, and ROS
Our tutorials were made using Ubuntu 12.04 LTS. In order to move the P3-DX in Gazebo you will have to install Gazebo, you can do that here. In order to move the P3-DX in Gazebo, you must first install ROS. In our tutorial we used ROS Hydro. You can install ROS Hydro from here.
Obtaining the P3-DX model
Git clone P3-DX model from https://github.com/SD-Robot-Vision/PioneerModel.git
$ git clone https://github.com/SD-Robot-Vision/PioneerModel.git
Install the P3-DX model in your catkin_ws by following the steps in the README of the git repository.
Get code for moving the P3-DX
The code you will use to move the P3-DX is in a ROS package on Github. First clone the package from Github into your catkin_ws.
$ git clone https://github.com/SD-Robot-Vision/p3dx_mover.git
Now use catkin_make after cd-ing into your catkin_ws.
$ roscd $ cd .. $ catkin_make
