Minibot Arm

From Lofaro Lab Wiki
Revision as of 21:59, 2 December 2014 by Eeide (Talk | contribs)

Jump to: navigation, search

This is part two of building MiniBot and Archer there is some additional explanation in the Head Build

The claw in this part you should have down loaded the cad files for the link. In the link there is a file called minibot. In that file there is a minibot build file that has the whole build of minibot. all you will need to do is save it as an stl which is explained in the Head Build and print the parts.

The first thing that you will need to do is print the thumb2 file and the Archer claw or Minibot claw to depending on weather you are building the Minibot robot or archer controller.

Minibotclaw.png