Difference between revisions of "Minibot Arm"

From Lofaro Lab Wiki
Jump to: navigation, search
Line 4: Line 4:
  
 
'''The claw'''
 
'''The claw'''
In this part you should have down loaded the [http://WDMyCloud.device1083053.wd2go.com/api/1.0/rest/file_contents/Public/Lofaro%20labs/cad%20files.zip?device_user_id=9466339&request_auth_code=f882d4003afa5381d5ba5defaa1e136a167cd945b8658e414f2828ade9e6322f cad files] for the link. In the link there is a file called minibot. In that file there is a minibot build file that has the whole build of minibot. all you will need to do is save it as an stl which is explained in the [http://wiki.lofarolabs.com/index.php/Head_Build Head Build] and print the parts.
+
In this part you should have down loaded the [http://WDMyCloud.device1083053.wd2go.com/api/1.0/rest/file_contents/Public/Lofaro%20labs/cad%20files.zip?device_user_id=9466339&request_auth_code=f882d4003afa5381d5ba5defaa1e136a167cd945b8658e414f2828ade9e6322f cad files] for the link. In the link there is a folder called minibot. In that file there is a minibot build file that has the whole build of minibot. all you will need to do is save it as an stl which is explained in the [http://wiki.lofarolabs.com/index.php/Head_Build Head Build] and print the parts.
  
 
The first thing that you will need to do is print the thumb2 file and the Archer claw or Minibot claw to depending on weather you are building the Minibot robot or archer controller.
 
The first thing that you will need to do is print the thumb2 file and the Archer claw or Minibot claw to depending on weather you are building the Minibot robot or archer controller.

Revision as of 08:34, 3 December 2014

This is part two of building MiniBot and Archer there is some additional explanation in the Head Build

Note the zero position will always be at the top of the servo.

The claw In this part you should have down loaded the cad files for the link. In the link there is a folder called minibot. In that file there is a minibot build file that has the whole build of minibot. all you will need to do is save it as an stl which is explained in the Head Build and print the parts.

The first thing that you will need to do is print the thumb2 file and the Archer claw or Minibot claw to depending on weather you are building the Minibot robot or archer controller.

  • As shown in the figure there are 4 S2 screws, 6 S1 screws, one S-B screw, one BU and there needs to be 6 N1 nuts for connecting the thumb2 file to the servo

Minibotclaw.png

Forearm

  • This part needs 8 S1 screws and 8 N1 nuts.

Forarm.png

  • Connecting the forearm to the servos is simple you use 8 total S1 screws and 8 N1 nuts. The nuts are inserted into the servo and the screws are connected from there.

Building1.png

Bicep

  • 4 S1 screws and 4 N1 nuts

Bi.png

  • Next add two S1 and two S3 screws to the positions shown below connecting the servo to the Bicep with the zero position pointing as shown in the figure.

Bi2.png

  • Add 4 S2 screws and N1 nuts to this connecting the parts.

Bi3.png

Assembling part one In the figure below you should see all the parts that you have connected so far simply connect them you will need the parts below. also make sure the zero positions are as shown

  • 4 S1 screws
  • 1 S-B
  • 1 BU

Building2.png

Shoulder here you need to connect the two items you will need the parts shown and the parts listed below

  • 4 S2 screws and 4 N1 nuts

Shoulder.png

Assembling part two

The shoulder parts need to be connected to a servo as shown. it is a tight fit but it works. you will need to do these screws on both sides of the servo. also if you do 6 screws it will make it so the plastic takes longer to break.

  • 4 S1 screws
  • 4 N1 nuts

Building3.png

next you need to add another servo as shown below.

  • 4 S1 screws
  • 1 S-B screw
  • 1 BU

Building4.png