Difference between revisions of "Minibot"
Line 22: | Line 22: | ||
''client'' | ''client'' | ||
− | x=1 #just a constant for the while loop | + | x=1 #just a constant for the while loop |
− | + | host = '192.168.0.111' #this is the current computers IP | |
− | host = '192.168.0.111' #this is the current computers IP | + | port = 21111 #this is just a random port number |
− | + | server = ('192.168.0.102',20000) #tells the computer where to listen and send the IP address in this one should match the computer above | |
− | port = 21111 #this is just a random port number | + | s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM) #tells to use network/udp |
− | + | while (x == 1): #this makes it so that if a port is taken it will try for a new port only works for client because server must be known | |
− | server = ('192.168.0.102',20000) #tells the computer where to listen and send the IP address in this one should match the computer above | + | |
− | + | ||
− | s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM) #tells to use network/udp | + | |
− | + | ||
− | while (x == 1): #this makes it so that if a port is taken it will try for a new port only works for client because server must be known | + | |
try: | try: | ||
print port | print port |
Revision as of 11:12, 27 November 2014
This is MiniBot it is the robot that we maid for out Senior design project.
Networking we used import socket for sending information over a network with a client and a server
server
the code for the server is
-host = '192.168.0.102' #gets comp ip address
-port = 20000 #random port this can be set to almost anything between 1023 and 6000 ish once you start a server if you need to restart it you will need to close that terminal and open a new one so the port will no longer be in use
-s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM) this part is what tells the socket what kind of data we want to use AF_INET tells network/internet and sock_DGRAM tells it to use udp packets (these are somewhat unstable as they are not checked)
-s.bind((str(host), port)) #binds s to the server so it can be called
-data, addr = s.recvfrom(1024) this tells the program to wait till it gets a packet from the client the 1024 can be lowered but should be in base 2 if you leave it at 1024 it will be fine it just tells it to take data that is only 1024 or less
client
x=1 #just a constant for the while loop host = '192.168.0.111' #this is the current computers IP port = 21111 #this is just a random port number server = ('192.168.0.102',20000) #tells the computer where to listen and send the IP address in this one should match the computer above s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM) #tells to use network/udp while (x == 1): #this makes it so that if a port is taken it will try for a new port only works for client because server must be known try: print port s.bind((host, port)) #trys this port if it is taken then moves on to a new port x=0 except IOError: port+=1 else: port+=1