Difference between revisions of "Magnetic Resonator Guitar (MR.G)"

Revision as of 20:08, 25 November 2014

Magnetic Resonator Guitar information will go here

1. Overview 2. Circuit Schematic 3. PCB design 4. Raspberry Pi setup 5. Coding 6. Initial Prototype 7. Final Report

Parts list to populate PCB
Resistors: 1K = R1,R6,R14; 2.2K = R2; 10K = R4,R5,R13; 22K = R9,R10,R11; 100K = R3,R7; 220K = R12; 1M = R8

Capacitors: 0.1uF (Tantalum) = C2,C4; 0.1uF (Mylar) = C5,C6,C10,C12; 0.33uF (Tantalum) = C1,C3; 1.0uF (Tantalum) = C7; 10uF (Electrolytic) = C8; 100uF (Electrolytic) = C9; 1000uF (Electrolytic) = C11

@@ Line 13: / Line 13: @@
 == Circuit and PCB Design ==
-Parts list to populate PCB:
+;Parts list to populate PCB:
-Resistors
+;Resistors
-K   = R1,R6,R14
+:1K   = R1,R6,R14
-.2K = R2
+:2.2K = R2
-K  = R4,R5,R13
+:10K  = R4,R5,R13
-K  = R9,R10,R11
+:22K  = R9,R10,R11
-K = R3,R7
+:100K = R3,R7
-K = R12
+:220K = R12
-M   = R8
+:1M   = R8
-Capacitors
+;Capacitors
-.1uF  (Tantalum)     = C2,C4
+:0.1uF  (Tantalum)     = C2,C4
-.1uF  (Mylar)        = C5,C6,C10,C12
+:0.1uF  (Mylar)        = C5,C6,C10,C12
-.33uF (Tantalum)     = C1,C3
+:0.33uF (Tantalum)     = C1,C3
-.0uF  (Tantalum)     = C7
+:1.0uF  (Tantalum)     = C7
-uF   (Electrolytic) = C8
+:10uF   (Electrolytic) = C8
-uF  (Electrolytic) = C9
+:100uF  (Electrolytic) = C9
-uF (Electrolytic) = C11
+:1000uF (Electrolytic) = C11
-IC
+;ICs
-Voltage Regulators
+;Voltage Regulators
-M16 or 78M15 = VR1
+:78M16 or 78M15 = VR1
-M12A = VR2
+:78M12A = VR2
-Amplifiers
+;Amplifiers
-TLC37M4CN = U1
+:TLC37M4CN = U1
-LM1875T   = U2
+:LM1875T   = U2