Difference between revisions of "ECE-370: Robot Design"
From Lofaro Lab Wiki
(→Setup Wifi) |
(→Setup Wifi) |
||
Line 21: | Line 21: | ||
# Go to the SD card drive named "boot" | # Go to the SD card drive named "boot" | ||
# Place the wpa_supplicant.conf created above inside of "boot". This will automatically copy wpa_supplicant.conf to its required place (i.e. /etc/wpa_supplicant/) | # Place the wpa_supplicant.conf created above inside of "boot". This will automatically copy wpa_supplicant.conf to its required place (i.e. /etc/wpa_supplicant/) | ||
+ | # Mount the 2nd partition (type ext4) | ||
+ | ** Linux: native | ||
+ | ** Mac: | ||
+ | $ brew cask install osxfuse | ||
+ | $ brew install ext4fuse | ||
+ | $ ext4fuse /dev/diskNsM $HOME/tmp/my-linux-mount -o allow_other | ||
+ | ** Windows: use [http://www.ext2fsd.com/ Ext2Fsd] |
Revision as of 21:44, 27 January 2019
Install Raspbian
Prerequisite
- 1x Raspberry Pi Zero W
- 1x MicroCenter brand 32gb Series 10 micro SD card (or larder if using another brand)
Install OS
You need to install Raspbian-Full 2018-11-13 version (see link below):
Once the image is downloaded follow the directions below to install the base image:
Setup Wifi
This section describes how to setup the wifi on your raspberry pi zero w without the need for a keyboard or monitor attached to the device.
- Download the wpa_supplican.conf example file here
- Rename wpa_supplicant.conf.example to wpa_supplicant.conf
- Setup your wifi name and password (note: you will be using "eduroam")
- Change your GMU password, this will ensure it will not expire during the course of the class
- Modify "identity" to match your GMU email address
- Modify "password" to match your GMU email password
- Insert the SD card into your computer
- Go to the SD card drive named "boot"
- Place the wpa_supplicant.conf created above inside of "boot". This will automatically copy wpa_supplicant.conf to its required place (i.e. /etc/wpa_supplicant/)
- Mount the 2nd partition (type ext4)
- Linux: native
- Mac:
$ brew cask install osxfuse $ brew install ext4fuse $ ext4fuse /dev/diskNsM $HOME/tmp/my-linux-mount -o allow_other
- Windows: use Ext2Fsd