Difference between revisions of "ECE-370: Robot Design"
From Lofaro Lab Wiki
(→Install Raspbian) |
(→Setup Wifi) |
||
Line 12: | Line 12: | ||
==Setup Wifi== | ==Setup Wifi== | ||
This section describes how to setup the wifi on your raspberry pi zero w without the need for a keyboard or monitor attached to the device. | This section describes how to setup the wifi on your raspberry pi zero w without the need for a keyboard or monitor attached to the device. | ||
− | |||
# Download the wpa_supplican.conf example file [http://www.files.lofaro.net/misc/wpa_supplicant.conf.example here] | # Download the wpa_supplican.conf example file [http://www.files.lofaro.net/misc/wpa_supplicant.conf.example here] | ||
# Rename wpa_supplicant.conf.example to wpa_supplicant.conf | # Rename wpa_supplicant.conf.example to wpa_supplicant.conf | ||
− | # Setup your wifi name and password (note: you will be using "eduroam | + | # Setup your wifi name and password (note: you will be using "eduroam") |
+ | ## Change your GMU password, this will ensure it will not expire during the course of the class | ||
+ | ## Modify "identity" to match your GMU email address | ||
+ | ## Modify "password" to match your GMU email password | ||
+ | # Insert the SD card into your computer | ||
+ | # Go to the SD card drive named "boot" | ||
+ | # Place the wpa_supplicant.conf created above inside of "boot". This will automatically copy wpa_supplicant.conf to its required place (i.e. /etc/wpa_supplicant/) |
Revision as of 21:25, 27 January 2019
Install Raspbian
Prerequisite
- 1x Raspberry Pi Zero W
- 1x MicroCenter brand 32gb Series 10 micro SD card (or larder if using another brand)
Install OS
You need to install Raspbian-Full 2018-11-13 version (see link below):
Once the image is downloaded follow the directions below to install the base image:
Setup Wifi
This section describes how to setup the wifi on your raspberry pi zero w without the need for a keyboard or monitor attached to the device.
- Download the wpa_supplican.conf example file here
- Rename wpa_supplicant.conf.example to wpa_supplicant.conf
- Setup your wifi name and password (note: you will be using "eduroam")
- Change your GMU password, this will ensure it will not expire during the course of the class
- Modify "identity" to match your GMU email address
- Modify "password" to match your GMU email password
- Insert the SD card into your computer
- Go to the SD card drive named "boot"
- Place the wpa_supplicant.conf created above inside of "boot". This will automatically copy wpa_supplicant.conf to its required place (i.e. /etc/wpa_supplicant/)