Difference between revisions of "ECE-370: Robot Design"
From Lofaro Lab Wiki
(→Install Raspbian) |
(→Install Raspbian) |
||
| Line 1: | Line 1: | ||
=Install Raspbian= | =Install Raspbian= | ||
| + | ==Prerequisite== | ||
| + | * 1x Raspberry Pi Zero W | ||
| + | * 1x MicroCenter brand 32gb Series 10 micro SD card (or larder if using another brand) | ||
| + | |||
| + | ==Install OS== | ||
You need to install Raspbian-Full 2018-11-13 version (see link below): | You need to install Raspbian-Full 2018-11-13 version (see link below): | ||
| − | * [http://www.files.lofaro.net/os/raspbian/2018-11-13-raspbian-stretch-full.zip Raspbian-Full 2018-11-13] | + | * [http://www.files.lofaro.net/os/raspbian/2018-11-13-raspbian-stretch-full.zip Raspbian-Full 2018-11-13 Image] |
Once the image is downloaded follow the directions below to install the base image: | Once the image is downloaded follow the directions below to install the base image: | ||
* [https://www.raspberrypi.org/documentation/installation/installing-images/ Raspbian Install Directions] | * [https://www.raspberrypi.org/documentation/installation/installing-images/ Raspbian Install Directions] | ||
| + | |||
| + | ==Setup Wifi== | ||
| + | This section describes how to setup the wifi on your raspberry pi zero w without the need for a keyboard or monitor attached to the device. | ||
| + | # Insert the SD card into your computer | ||
| + | # Download the wpa_supplican.conf example file [http://www.files.lofaro.net/misc/wpa_supplicant.conf.example here] | ||
| + | # Rename wpa_supplicant.conf.example to wpa_supplicant.conf | ||
| + | # Setup your wifi name and password (note: you will be using "eduroam'' | ||
Revision as of 21:12, 27 January 2019
Install Raspbian
Prerequisite
- 1x Raspberry Pi Zero W
- 1x MicroCenter brand 32gb Series 10 micro SD card (or larder if using another brand)
Install OS
You need to install Raspbian-Full 2018-11-13 version (see link below):
Once the image is downloaded follow the directions below to install the base image:
Setup Wifi
This section describes how to setup the wifi on your raspberry pi zero w without the need for a keyboard or monitor attached to the device.
- Insert the SD card into your computer
- Download the wpa_supplican.conf example file here
- Rename wpa_supplicant.conf.example to wpa_supplicant.conf
- Setup your wifi name and password (note: you will be using "eduroam
