ECE-370: Make GitHub account and 3D design of name plate
From Lofaro Lab Wiki
Due: 2019-02-04
- Create GitHub account ([click here])
- Create name plate model in Fusion 360 with letters 1cm tall with a 0.5cm header and footer and 0.25in holes on the center line your name and placed 0.5cm from the left and right most letter. The left and right margins should be 0.5 cm. The whole model should be no more than 1cm thick.
- Export the above model as STL and upload it to GIT
- Post the link to the git project with the model in it.
