Digital Theremin Violin (DTV)

From Lofaro Lab Wiki
Revision as of 14:20, 5 May 2017 by Tsohrab (Talk | contribs)

Jump to: navigation, search

Violin.jpg

Digital Theremin Violin ~ Spring 2017 ~

Introduction

The Digital Theremin Violin is an instrument that will be combining the classical elegance of the violin and structure with a modern day, completely electric, masterpiece of the theremin. Several inputs varying from a capacitive touch interface, waveform modification and other sound knobs, and a bow constructed of magnets. The instrument will take the previous inputs and create a one of a kind sound.

Code and Source Files

All associated files and source code can be found Here
Microcomputer Code Here
  • before this you MUST install and create Port Audio library.
  • This must be compiled using the following gcc command "gcc DTV.c libportaudio.a -lrt -lm -lasound -pthread -lwiringPi -o sine5"
Microcontroller Code Here
  • This must be ran onto the ATmega32u4 prior to setting the rest of the system up.
Amplitude Modulation Circuit Files
  • NOTE: Never verified AM Circuit PCB worked
Capacitive Touch Interface Circuit Files
  • NOTE: The outputs of this circuit MUST all be hooked to a resistor (we used 100kΩ) the other side of the resistor connecting to your sensing pin of ATmega32u4.
3D CAD Design Files Here
  • The .MakerBot, .ipt, and .iam files
  • The source code files are also in this directory for some reason?

Team

Team.jpg

From left to right:
  • Taimur Sohrab
  • Kishn Parbadia
  • Ayman Alhandali
  • Dr. Daniel Lofaro
  • Gideon Anderson
  • Rafael Gomes