Connecting all the parts

From Lofaro Lab Wiki
Revision as of 10:51, 3 December 2014 by Eeide (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This is the 4th part of building Minibot see the other parts if you have not done so.

First we connect the head to the body to do that we need to put nuts into the f53 part as we did with the base.

  • 8 N1 nuts

F53holes.png

Next connect it to the servo with the other holes as shown in the figure.

  • 4-6 S1 screws
  • 4-6 N1 nuts

Headattach.png

After doing that carefully add the s2 screws to the N1 nuts.

  • 8 S2 screws

Headtobody.png

All that is left is to connect the arm for that you will need.

  • 4 S1 screws and 4 N1 nuts

Connectarmtobody.png

congrats you are done