Difference between revisions of "CRITR/pcb gen2"
From Lofaro Lab Wiki
m (Echung8 moved page Critrs/pcb gen2 to CRITR/pcb gen2) |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 2: | Line 2: | ||
[[File:odroid_pcb.png]] | [[File:odroid_pcb.png]] | ||
| + | |||
| + | Below is the wiring schematic. We organized it to easily discern which components are additions, when comparing it directly to the PCB from generation one. | ||
[[File:odroid_schem.png]] | [[File:odroid_schem.png]] | ||
Latest revision as of 13:17, 8 December 2015
Below is our PCB design for the second generation of CRITR. This generation utilizes an Odroid as the processing unit, instead of the Raspberry Pi. We needed to make the switch-over, because the Raspberry Pi didn't provide as much processing power as the Odroid did. The differences between this generation and the previous included the addition of on-board logic level shifters, pins for the direct connection of the OpenCM, pins to connect a barrel power supplier for the odroid, and a pin for the battery to directly connect.
Below is the wiring schematic. We organized it to easily discern which components are additions, when comparing it directly to the PCB from generation one.
