Difference between revisions of "CRITR/Generation 1/Arm and Arm controller"

From Lofaro Lab Wiki
Jump to: navigation, search
 
(15 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
Notes:  
 
Notes:  
  
* The zero positions of servo’s will be place at top.
+
* The zero positions of servo’s will be place at top of the servo.
 
* There are only one arm in the instruction.
 
* There are only one arm in the instruction.
 
* Face the servo as shown in image for one arm.
 
* Face the servo as shown in image for one arm.
 
* Another arm will be mirrored to the instruction.
 
* Another arm will be mirrored to the instruction.
* 2-step rivets are used for all instruction.
+
* 2-step rivets are used for all instruction except where indicated.
 
* To construct, follow the pictures below in order.
 
* To construct, follow the pictures below in order.
  
 
3D printing :
 
3D printing :
* STL files are uploaded here.
+
* STL files are uploaded [http://www.thingiverse.com/thing:1178334  here].
 
* You might need to convert STL files to 3D printable file.
 
* You might need to convert STL files to 3D printable file.
  
Line 16: Line 16:
  
 
[[File:p1_(2).PNG]]  
 
[[File:p1_(2).PNG]]  
 
 
[[File:p1_(6).PNG]]  
 
[[File:p1_(6).PNG]]  
  
 
[[File:p1_(4).PNG]]  
 
[[File:p1_(4).PNG]]  
 
 
[[File:p1_(3).PNG]]  
 
[[File:p1_(3).PNG]]  
  
Line 26: Line 24:
  
 
[[File:p1_(8).PNG]]  
 
[[File:p1_(8).PNG]]  
 
[[File:p1_(9).PNG]]
 
  
 
[[File:p1_(10).PNG]]  
 
[[File:p1_(10).PNG]]  
Line 33: Line 29:
  
 
[[File:p1_(11).PNG]]  
 
[[File:p1_(11).PNG]]  
 
[[File:p1_(12).PNG]]
 
[[File:p1_(13).PNG]]
 
 
The picture shown on right is flipped view of picture on left.
 
 
 
[[File:p1_(14).PNG]]
 
  
 
[[File:p1_(15).PNG]]  
 
[[File:p1_(15).PNG]]  
 +
Use 3step rivet to connect.
  
 
[[File:p1_(16).PNG]]  
 
[[File:p1_(16).PNG]]  
Line 49: Line 38:
  
 
[[File:p1_(18).PNG]]  
 
[[File:p1_(18).PNG]]  
 
[[File:p1_(19).PNG]]
 
  
 
[[File:p1_(20).PNG]]
 
[[File:p1_(20).PNG]]

Latest revision as of 13:55, 8 December 2015

Notes:

  • The zero positions of servo’s will be place at top of the servo.
  • There are only one arm in the instruction.
  • Face the servo as shown in image for one arm.
  • Another arm will be mirrored to the instruction.
  • 2-step rivets are used for all instruction except where indicated.
  • To construct, follow the pictures below in order.

3D printing :

  • STL files are uploaded here.
  • You might need to convert STL files to 3D printable file.


P1 (1).PNG

P1 (2).PNG P1 (6).PNG

P1 (4).PNG P1 (3).PNG

P1 (7).PNG

P1 (8).PNG

P1 (10).PNG


P1 (11).PNG

P1 (15).PNG Use 3step rivet to connect.

P1 (16).PNG

P1 (17).PNG

P1 (18).PNG

P1 (20).PNG