Difference between revisions of "CRITR/Generation 1/Arm and Arm controller"
From Lofaro Lab Wiki
m (Echung8 moved page CRITR/Prototype 1/Arm and Arm controller to CRITR/Generation 1/Arm and Arm controller) |
|||
(20 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
Notes: | Notes: | ||
− | The zero positions of servo’s will be place at top. | + | * The zero positions of servo’s will be place at top of the servo. |
− | + | * There are only one arm in the instruction. | |
− | + | * Face the servo as shown in image for one arm. | |
− | + | * Another arm will be mirrored to the instruction. | |
− | + | * 2-step rivets are used for all instruction except where indicated. | |
− | + | * To construct, follow the pictures below in order. | |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
3D printing : | 3D printing : | ||
− | + | * STL files are uploaded [http://www.thingiverse.com/thing:1178334 here]. | |
− | + | * You might need to convert STL files to 3D printable file. | |
− | + | ||
− | + | ||
− | + | ||
Line 25: | Line 16: | ||
[[File:p1_(2).PNG]] | [[File:p1_(2).PNG]] | ||
+ | [[File:p1_(6).PNG]] | ||
− | |||
[[File:p1_(4).PNG]] | [[File:p1_(4).PNG]] | ||
+ | [[File:p1_(3).PNG]] | ||
− | |||
− | |||
− | |||
[[File:p1_(7).PNG]] | [[File:p1_(7).PNG]] | ||
[[File:p1_(8).PNG]] | [[File:p1_(8).PNG]] | ||
− | |||
− | |||
[[File:p1_(10).PNG]] | [[File:p1_(10).PNG]] | ||
Line 42: | Line 29: | ||
[[File:p1_(11).PNG]] | [[File:p1_(11).PNG]] | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
[[File:p1_(15).PNG]] | [[File:p1_(15).PNG]] | ||
+ | Use 3step rivet to connect. | ||
[[File:p1_(16).PNG]] | [[File:p1_(16).PNG]] | ||
Line 58: | Line 38: | ||
[[File:p1_(18).PNG]] | [[File:p1_(18).PNG]] | ||
− | |||
− | |||
[[File:p1_(20).PNG]] | [[File:p1_(20).PNG]] |
Latest revision as of 13:55, 8 December 2015
Notes:
- The zero positions of servo’s will be place at top of the servo.
- There are only one arm in the instruction.
- Face the servo as shown in image for one arm.
- Another arm will be mirrored to the instruction.
- 2-step rivets are used for all instruction except where indicated.
- To construct, follow the pictures below in order.
3D printing :
- STL files are uploaded here.
- You might need to convert STL files to 3D printable file.