Difference between revisions of "CRITR/Generation 1/Arm and Arm controller"

From Lofaro Lab Wiki
Jump to: navigation, search
Line 31: Line 31:
  
 
[[File:p1_(15).PNG]]  
 
[[File:p1_(15).PNG]]  
Use 3step rivet to connect as shown above.
+
Use 3step rivet to connect.
  
 
[[File:p1_(16).PNG]]  
 
[[File:p1_(16).PNG]]  

Revision as of 14:36, 6 December 2015

Notes:

  • The zero positions of servo’s will be place at top of the servo.
  • There are only one arm in the instruction.
  • Face the servo as shown in image for one arm.
  • Another arm will be mirrored to the instruction.
  • 2-step rivets are used for all instruction except where indicated.
  • To construct, follow the pictures below in order.

3D printing :

  • STL files are uploaded here.
  • You might need to convert STL files to 3D printable file.


P1 (1).PNG

P1 (2).PNG P1 (6).PNG

P1 (4).PNG P1 (3).PNG

P1 (7).PNG

P1 (8).PNG

P1 (10).PNG


P1 (11).PNG

P1 (15).PNG Use 3step rivet to connect.

P1 (16).PNG

P1 (17).PNG

P1 (18).PNG

P1 (20).PNG