Difference between revisions of "CRITR/Generation 1/Arm and Arm controller"
From Lofaro Lab Wiki
Line 5: | Line 5: | ||
* Face the servo as shown in image for one arm. | * Face the servo as shown in image for one arm. | ||
* Another arm will be mirrored to the instruction. | * Another arm will be mirrored to the instruction. | ||
− | * 2-step rivets are used for all instruction. | + | * 2-step rivets are used for all instruction except where indicated. |
* To construct, follow the pictures below in order. | * To construct, follow the pictures below in order. | ||
Revision as of 14:35, 6 December 2015
Notes:
- The zero positions of servo’s will be place at top of the servo.
- There are only one arm in the instruction.
- Face the servo as shown in image for one arm.
- Another arm will be mirrored to the instruction.
- 2-step rivets are used for all instruction except where indicated.
- To construct, follow the pictures below in order.
3D printing :
- STL files are uploaded here.
- You might need to convert STL files to 3D printable file.