Difference between revisions of "CRITR/Generation 1/Arm and Arm controller"
From Lofaro Lab Wiki
Line 9: | Line 9: | ||
3D printing : | 3D printing : | ||
− | * STL files are uploaded here. | + | * STL files are uploaded [here]. |
* You might need to convert STL files to 3D printable file. | * You might need to convert STL files to 3D printable file. | ||
Revision as of 14:33, 6 December 2015
Notes:
- The zero positions of servo’s will be place at top.
- There are only one arm in the instruction.
- Face the servo as shown in image for one arm.
- Another arm will be mirrored to the instruction.
- 2-step rivets are used for all instruction.
- To construct, follow the pictures below in order.
3D printing :
- STL files are uploaded [here].
- You might need to convert STL files to 3D printable file.