Difference between revisions of "CRITR/Generation 1/Arm and Arm controller"
From Lofaro Lab Wiki
Line 1: | Line 1: | ||
Notes: | Notes: | ||
− | The zero positions of servo’s will be place at top. | + | The zero positions of servo’s will be place at top.\n |
• There are only one arm in the instruction. | • There are only one arm in the instruction. | ||
• Face the servo as shown in image for one arm. | • Face the servo as shown in image for one arm. |
Revision as of 01:59, 7 November 2015
Notes: The zero positions of servo’s will be place at top.\n • There are only one arm in the instruction. • Face the servo as shown in image for one arm. • Another arm will be mirrored to the instruction. • 2-step rivets are used for all instruction. • To construct, follow the pictures below in order.
3D printing : • STL files are uploaded here. • You might need to convert STL files to 3D printable file.
The picture shown on right is flipped view of picture on left.