Difference between revisions of "CNC Router (Gerber)"
From Lofaro Lab Wiki
(→What you will learn) |
|||
| Line 10: | Line 10: | ||
* Set work origin | * Set work origin | ||
* Export appropriate G code | * Export appropriate G code | ||
| − | * | + | * Drill a hole/Plunge into stock |
* Clear a pocket | * Clear a pocket | ||
* Follow a contour | * Follow a contour | ||
Revision as of 23:35, 27 December 2017
Contents
Overview
Learn how to use, maintain and operate CNC routers.
Prerequisites
- 3D CAD Modeling (| Fusion 360)
What you will learn
- Load and remove an end mill
- Secure a work piece
- Set work origin
- Export appropriate G code
- Drill a hole/Plunge into stock
- Clear a pocket
- Follow a contour
Estimated time required
~180 min, varies depending on prior experience using CAD/CAM
Signature Requirements
Make a plate a wood plate of your initials:
- Minimum two letters
- Text tool is not allowed
- 0.25" holes at each corner
- A unique piece of stock will be assigned to you
- Plate must be milled using 0.25in flat end mill only
