Difference between revisions of "CNC Router (Gerber)"
From Lofaro Lab Wiki
(→Estimated time required) |
|||
Line 18: | Line 18: | ||
= Signature Requirements = | = Signature Requirements = | ||
− | + | Make a plate a wood plate of your initials: | |
+ | * Minimum two letters | ||
* Text tool is not allowed | * Text tool is not allowed | ||
+ | * 0.25" holes at each corner | ||
+ | * A unique piece of stock will be assigned to you | ||
+ | * Plate must be milled using 0.25in flat end mill only | ||
= Procedure/Instructions = | = Procedure/Instructions = |
Revision as of 23:33, 27 December 2017
Contents
Overview
Learn how to use, maintain and operate CNC routers.
Prerequisites
- 3D CAD Modeling (| Fusion 360)
What you will learn
- Load and remove an end mill
- Secure a work piece
- Set work origin
- Export appropriate G code
- How to drill a hole/Plunge into stock
- Clear a pocket
- Follow a contour
Estimated time required
~180 min, varies depending on prior experience using CAD/CAM
Signature Requirements
Make a plate a wood plate of your initials:
- Minimum two letters
- Text tool is not allowed
- 0.25" holes at each corner
- A unique piece of stock will be assigned to you
- Plate must be milled using 0.25in flat end mill only