Difference between revisions of "CNC Router (Gerber)"
From Lofaro Lab Wiki
(→Signature Requirements) |
(→What you will learn) |
||
| Line 6: | Line 6: | ||
= What you will learn = | = What you will learn = | ||
| − | + | * Load and remove an end mill | |
| + | * Secure a work piece | ||
| + | * Set work origin | ||
| + | * Export appropriate G code | ||
| + | * How to drill a hole/Plunge into stock | ||
| + | * Clear a pocket | ||
| + | * Follow a contour | ||
= Estimated time required = | = Estimated time required = | ||
Revision as of 17:11, 27 December 2017
Contents
Overview
Learn how to use, maintain and operate CNC routers.
Prerequisites
- 3D CAD Modeling (| Fusion 360)
What you will learn
- Load and remove an end mill
- Secure a work piece
- Set work origin
- Export appropriate G code
- How to drill a hole/Plunge into stock
- Clear a pocket
- Follow a contour
Estimated time required
180 min
Signature Requirements
- Make a plate a wood plate of your initials with 0.25" holes at each corner, from a given stock piece. Plate must be milled using 0.25in flat end mill.
- Text tool is not allowed
