Difference between revisions of "CNC Router (Gerber)"

From Lofaro Lab Wiki
Jump to: navigation, search
(What you will learn)
(What you will learn)
Line 6: Line 6:
  
 
= What you will learn =
 
= What you will learn =
* Load and remove an end mill
+
* change end mill
 
* Secure a work piece  
 
* Secure a work piece  
 
* Set work origin
 
* Set work origin

Revision as of 00:29, 28 December 2017

Overview

Learn how to use, maintain and operate CNC routers.

Prerequisites

What you will learn

  • change end mill
  • Secure a work piece
  • Set work origin
  • Export appropriate G code
  • Drill a hole/Plunge into stock
  • Clear a pocket
  • Follow a contour

Estimated time required

~180 min, varies depending on prior experience using CAD/CAM

Signature Requirements

Make a plate a wood plate of your initials:

  • Minimum two letters
  • Text tool is not allowed
  • 0.25" holes at each corner
  • A unique piece of stock will be assigned to you
  • Plate must be milled using 0.25in flat end mill only

Procedure/Instructions