A Basic 3D Printer Guide

From Lofaro Lab Wiki
Revision as of 17:17, 2 November 2014 by Dewnetu (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Printer Model in the Lab: MakerBot Replicator 2X(Eric's Printer)


General information about the 3D printer and 3D printing process


Application The 3D printer in the lab is a basic printer. Most of the time, it is only used to print smaller pieces. Printing larger pieces, might take a lot of time.