Difference between revisions of "3D Printing (SLA)"
From Lofaro Lab Wiki
Line 32: | Line 32: | ||
# | # | ||
[[File:Printer.png|thumb|center|600px]] | [[File:Printer.png|thumb|center|600px]] | ||
+ | |||
+ | ===SLA Printing Set up=== | ||
+ | [[File:Resin.png]] | ||
+ | [[File:Ready to Print.png]] |
Revision as of 19:54, 21 January 2018
Contents
Overview
Learn how to use, maintain and operate SLA based 3D printers specifically the FormLabs printer Form 2.
Prerequistes
- 3D CAD Modeling Fusion 360
=Software Required
What you will learn
- Export 3D models to 3D printer compatible formats
- Load and unload resin
- How to start a print on Form 2 printer
Procedure
3D Modeling
- Save your file in STL format in Fusion 360
- Download and open Preform
- Import your file into a new workspace and scale and orientate as needed
Scale and Orientate
3d Modeling Cont.
- Click on the Click to Print button to allow the software to perfect the supports and print time required
- If the Print display at the bottom of the workspace still shows red follow these steps (otherwise skip to step #) :