Difference between revisions of "3D Printing"
From Lofaro Lab Wiki
(→Signature Requirements) |
(→Signature Requirements) |
||
Line 17: | Line 17: | ||
= Signature Requirements = | = Signature Requirements = | ||
* Scale [http://files.lofarolabs.com/mis/MAKE_Robot_Arms_Down_Supportless_V4.1.stl This Robot] to be 1cm tall using CAD (use current lab standard) and print it | * Scale [http://files.lofarolabs.com/mis/MAKE_Robot_Arms_Down_Supportless_V4.1.stl This Robot] to be 1cm tall using CAD (use current lab standard) and print it | ||
+ | * Calibrate X, Y, and Z axis | ||
+ | * Make full name with 1cm tall letters in CAD. Include a back plate with two 3.175mm holes for mounting purposes. Print this model | ||
= Procedure/Instructions = | = Procedure/Instructions = |
Revision as of 15:30, 9 November 2017
Contents
Overview
Learn how to use, maintain and operate PLA based 3D printers.
Prerequisites
- 3D CAD Modeling (| Fusion 360)
What you will learn
- Export 3D models to 3D printer compatible formats
- Change build plate
- Clear extruder
- Load and unload filament
- How to start a print on a 3D printer
Estimated time required
120 min
Signature Requirements
- Scale This Robot to be 1cm tall using CAD (use current lab standard) and print it
- Calibrate X, Y, and Z axis
- Make full name with 1cm tall letters in CAD. Include a back plate with two 3.175mm holes for mounting purposes. Print this model