Difference between revisions of "3D Printing"
From Lofaro Lab Wiki
(Created page with "= Overview = Learn how to use, maintain and operate PLA based 3D printers. = Prerequisites = * CAD Modeling ([https://www.autodesk.com/products/fusion-360/overview | Fusion...") |
(→Signature Requirements) |
||
(6 intermediate revisions by one other user not shown) | |||
Line 3: | Line 3: | ||
= Prerequisites = | = Prerequisites = | ||
− | * CAD Modeling ([https://www.autodesk.com/products/fusion-360/overview | Fusion 360]) | + | * 3D CAD Modeling ([https://www.autodesk.com/products/fusion-360/overview | Fusion 360]) |
= What you will learn = | = What you will learn = | ||
+ | * Export 3D models to 3D printer compatible formats | ||
+ | * Change build plate | ||
+ | * Clear extruder | ||
+ | * Load and unload filament | ||
+ | * How to start a print on a 3D printer | ||
+ | = Estimated time required = | ||
+ | 120 min | ||
− | = | + | = Signature Requirements = |
− | + | * Scale [http://files.lofarolabs.com/mis/MAKE_Robot_Arms_Down_Supportless_V4.1.stl This Robot] to be 1cm tall using CAD (use current lab standard) and print it | |
− | + | * Calibrate X, Y, and Z axis | |
− | + | * Make full name with 1cm tall letters in CAD. Include a back plate with two 6.35mm holes for mounting purposes. Print this model | |
= Procedure/Instructions = | = Procedure/Instructions = |
Latest revision as of 03:06, 7 December 2017
Contents
Overview
Learn how to use, maintain and operate PLA based 3D printers.
Prerequisites
- 3D CAD Modeling (| Fusion 360)
What you will learn
- Export 3D models to 3D printer compatible formats
- Change build plate
- Clear extruder
- Load and unload filament
- How to start a print on a 3D printer
Estimated time required
120 min
Signature Requirements
- Scale This Robot to be 1cm tall using CAD (use current lab standard) and print it
- Calibrate X, Y, and Z axis
- Make full name with 1cm tall letters in CAD. Include a back plate with two 6.35mm holes for mounting purposes. Print this model