S19 Buy items and install base software
From Lofaro Lab Wiki
Buy the following items:
- RaspberryPi Zero W from MicroCenter ($5)
- 32gb Series 10 micro SD card (MicroCenter brand ) ($4.99)
Install the following software:
- Autodesk Fusion 360 (sign up with your GMU email)
- Install raspbian on the SD card (Follow the instructions here: http://wiki.lofarolabs.com/index.php/Install_Raspbian) - do NOT use a monitor and/or keyboard connected to the pi.
Post screenshots of items installed and running.
